Data Logs Chapter 6
EuroPak-15a Receiver User Manual Rev 5 97
6.3.12 TIME Time Data
This log is output at the Time port at a maximum rate of 1 Hz and provides the GPS time of the receiver ’s 1 PPS
signal. It also includes the information on the receiver clock offset and the clock model status.
Log Type: Sync Message ID: 101
Recommended Input:
LOG TIMEA ONTIME 1
Example Output:
#TIMEA,COM1,0,58.0,FINE,1049,248050.000,00000128,5C46,0;
VALID,-0.000000002,0.000001901,-13.00000000294,2000,2,15,20,53,
57011,VALID*d6f14d5d
Field Field
Name Description Format Binary
Bytes Binary
Offset
1header This field contains the message header, in ASCII or Binary format. See
Section 4.3 on Page 35.H 0
2clock status Clock model status (not including current measurement
data). See Table36 on Page 79. Enum 4 H
3offset
Receiver clock offset, in seconds from GPS time. A positive
offset implies that the receiver clock is ahead of GPS time.
To derive GPS time, use the following formula:
GPS time = receiver time - offset
Double 8 H+4
4offset std Receiver clock offset standard deviation (s) Double 8 H+12
5-12 Reserved 24 H+20
13 32-bit CRC (ASCII and Binary only) Hex 4H+44