Installation
Rack-Mount Subsystem Assembly 15
Rack-Mount Subsystem Assembly
You can install the CR8e into any standard IAE 19" rack cabinet.
CAUTION: Ensure that the location of the CR8e does not create an unstable
condition when installed in the rack cabinet enclosure.
NOTE: Mount the subsystem into the rack enclosure before installing the disk
drives. This will reduce the weight required to support during installation.
1Select an appropriate location in your rack cabinet for the CR8e. If you are
installing multiple systems, review the cabling configuration section later in
this chapter for your cable scheme to determine the optimum locations.

A

8-32 Pan Head
Screws
8-32 Caged
Nuts
Washers
Front Rack Vertical
Rear Rack Vertical