Maintenance
Replacing a Fuse
62
3Loosen the two thumb screws that secures the card.
4Insert the new I/O Interface card and tighten the thumb screws. Do not
overtighten the fasteners.
5Using the packaging materials from the replacement card, repackage the
failed card and return it to nStor Corporation. Refer to the nStor Resource
Guide for information on “Obtaining a Return Material Authorization.”
Replacing a Fuse
CAUTION: Power off the subsystem and disconnect the power cord before
changing the fuse.
1Locate the fuse holder on the rear panel of the CR8e.
2Using a small coin, turn the fuse holder counter-clockwise one quarter turn,
releasing the holder from its locked position.
Fuse Assembly
Power Connector Module
250V
Fuse (250V 10A)
Fuse Holder