Using the CR8e
Operator Control Panel
40
Operator Control Panel
In this section you will find an explanation of the Operator Control Panel screen
displays, as well as a description and subsequent procedures for using each of the
OCP menu functions.

Startup Screens

The following are sample screens that could occur during the startup POST
operation for normal conditions and abnormal conditions:
If a subsystem error occur during the startup, you will hear a continuous tone
from the alarm. Access the Component Status Menu to identify the suspected
failed component.
STATUS : OK
nStor CR8e
MENU ENTER ESCAPE
nStor
STARTING DUAL-BUS
CONFIGURATION
MENU ENTER ESCAPE

nStor

Startup Screen
(You will see either Dual-Bus or
Single-Bus, depending on the
configuration module installed.
Status OK Screen
Normal Screens
nStor CR8e
STATUS : HARDWARE
ERROR
MENU ENTER ESCAPE
nStor
MENU ENTER ESCAPE
STATUS : HEAT
THRESHOLD EXCEEDED
nStor CR8e
nStor
Hardware Error Screen
Temperature Exceeded Screen
Abnormal Screens