• Press/release the S button momentarily (< 2 seconds) to toggle between ON and OFF.
>If a Time has been set, a toggle from OFF to ON will Start the CD Timer indicated by the colon flashing.
>An ON/OFF toggle is prevented when S is operated to acknowledge/silence the Watch Daily Alarm.
•Pressing the A button momentarily (< 2 sec), or depressing the M button for 2 seconds, or if no button is pressed during a period of 2 minutes, the Display will revert to the FREE SURF MAIN screen.
•Depressing both the A and S buttons simultaneously for 2 seconds while viewing the CDT Status screen when the CD Timer is OFF will access the SET CDT screen with the MINUTE Set Point flashing.
NOTES: Once the CD TIMER has been Set and Started (by selecting ON), it will continue to run in the background while on the surface until turned OFF (stopped) or the Time reaches 0:00 at which time the Alarm will strike (3 short beeps 3 times), the message TIMR will be displayed, and the CDT will revert to OFF.
Upon descending to 5 FT/1.5 M (i.e., entry into FREE DIVE Mode), CDT operation will continue, if in progress.
The Set Point for the Watch CDT does not affect the FREE CDT.
109