CHRONOGRAPH (Stop Watch/Lap Timer)
•Pressing and releasing the M button momentarily 3 times (< 2 seconds each) while the MAIN TIME screen is displayed will access the CHRONOGRAPH displaying the elapsed time if previously started or 0:00:00.00 (hr:min:sec.1/100th sec), flashing (Fig. 19).
•Pressing and releasing the S button momentarily (< 2
seconds) will start the TIMER which will begin counting up from 0:00:00.00 to 9:59:59.99 (hr:min:sec.1/100th sec)
in increments of .01 (1/100th sec).
> During the first 4 seconds the 1/100th second values will be displayed, then 2 dashes ( . - - ) will be displayed. The 1/100th values will be recorded and displayed when LAPs are frozen and when later recalled.
•Subsequent pressing and releasing of the S button (< 2 seconds each) will freeze Lap Times (LAP1 through LAP9). After 9 Laps are recorded, additional LAPs will replace LAP9, shift the others to lower LAP numbers, while discarding LAP1.
>If the time reaches 9:59:59.99 hr:min:sec.1/100 sec, it will stop and save that number as a LAP. Subsequent presses of the S button will then have no effect.
•Pressing and releasing the A button momentarily (< 2 seconds) will Stop the Timer and Recall LAP1, displaying the graphic LAP1 (flashing) and the LAP 1 Time. Repeat presses will display other LAPs/Times (Fig. 20).
•Depressing and holding the A button for 2 seconds will stop the Timer and reset the Time to 0:00:00.00 (flashing).
Fig. 19 - CHRONO-
GRAPH
Fig. 20 - LAP RECALL
27