Oceanic GEO manual 58

Fig. 52 - SET

SAMPLING RATE

Fig. 53 - SERIAL

NUMBER

SET NORM/GAUG SAMPLING RATE, information includes

(Fig. 52):

>Graphics SAMP and SEC

>Set Point (seconds), flashing, with TIME icon.

•Pressing and releasing the S button momentarily (< 2

seconds) will step through the Set Points of 2, 15, 30, 60 (seconds).

•Pressing and releasing the A button (< 2 seconds) will accept the setting and/or advance to the SET U screen.

•Depressing and holding the M button for 2 seconds or if no button is pressed for a period of 2 minutes operation will revert to the NORM or GAUG SURF MAIN screen.

SERIAL NUMBER (SN)

•Depressing the A and S buttons simultaneously for 8 seconds while viewing the NORM (or GAUG) SURF MAIN screen will access the SN screen displaying (Fig. 53):

>Graphic SN

>Factory programmed Serial Number of the GEO.

>Firmware revision number (e.g., graphic r1A).

•Depressing the A and S buttons simultaneously for 2 seconds will revert to the NORM (or GAUG) SURF MAIN screen.

58