Oki C821 ITEM, ITEMS, ON LINE, SETTINGS, SETTINGS, COLOUR MENU, EXPLANATION, EXPLANATION, SYSTEM CONFIGURATION MENU

COLOUR MENU

The printer automatically adjusts colour balance and density at appropriate intervals, optimising the printed output for bright white paper viewed in natural daylight conditions. The items on this menu provide a means of changing the default settings for special or particularly difficult print jobs. Settings revert to their default values when the next print job is complete.

ITEM	SETTINGS	EXPLANATION
DENSITY CONTROL	AUTO	Selecting this will permit automatic adjustment of the
	MANUAL	colour density.
ADJUST DENSITY	EXECUTE	Image density will be automatically adjusted at power
		on, when a new image drum or toner cartridge is
		installed, and at intervals of 100, 300 and 500 drum
		counts. If a 500 drum count interval occurs during a
		print job it will occur at the end of that job, and will
		take up to 55 seconds.
AJST REGSTRATION	EXECUTE	Performs automatic colour registration adjustment.
		Normally this is done on power on and when the top
		cover is opened and then closed. This process
		accurately aligns the cyan, magenta and yellow images
		to the black image.
C REG FINE ADJ	-3~0~+3	Performs fine adjustment of image timing in relation to
M REG FINE ADJ	-3~0~+3	the black image component.
Y REG FINE ADJ	-3~0~+3

SYSTEM CONFIGURATION MENU

This menu adjusts general printer settings to suit the way you prefer to work.

ITEMS	SETTINGS	EXPLANATION
POW SAVE DELAY	1	Adjusts the idling time before the printer automatically
	3	switches into power saving mode. In this mode power
	5	consumption is reduced to a low level required to just
	15	keep the printer operating and ready to receive data.
	30	When a job is sent the printer will require a warm-up
	60	time of up to 1 minute before printing can begin.
	240
CLRABLE WARNING	ONLINE	When ONLINE, non-critical warnings, such as requests
	JOB	for a different paper size, can be cleared by pressing
		the ON LINE button. When set to JOB, they are
		cleared when the print job resumes.
MANUAL TIMEOUT	OFF	Specifies how many seconds the printer will wait for
	30	paper to be fed before cancelling the job.
	60
WAIT TIMEOUT	OFF~90~300	Specifies how many seconds the printer will wait when
		received data pauses before forcing a page eject. In
		PostScript Emulation mode the job will be cancelled if
		timeout occurs.
TONER LOW CONTINUE	CONTINUE	Specifies whether the printer should continue printing
	STOP	even after a low toner condition is detected.
JAM RECOVERY	ON	Specifies whether the printer should perform jam
	OFF	recovery after a paper jam has occurred. If ON, the
		printer will attempt to print again any pages lost due to
		a paper jam once the jam has been cleared.
ERROR REPORT	ON	Sets whether an error report is printed when an
	OFF	internal fault occurs.

Menu functions - C801 and C810 > 42