NOTE
When you have changed any settings in the USB MENU, turn the printer OFF, then ON again.
Security setupOnly available when a Hard Disk (option) is fitted.
ITEM | SETTINGS | EXPLANATION |
|
|
|
Job Limitations | Off | Job limitation mode control. |
| Encrypted | Jobs other than specified ones are rejected. |
| Job |
|
|
|
|
Reset Cipher Key | Execute | Resets a cipher key to be used on an encrypted hard |
|
| disk. |
|
| When this processing is done, all data stored on the hard |
|
| disk cannot be restored. |
|
| After execution, the following confirmation messages will |
|
| appear. |
|
| Are You Sure? |
|
| Yes |
|
| No |
|
| If No is selected, the display will return to the previous |
|
| menu. |
|
| If Yes is selected, the printer will be automatically |
|
| rebooted and the resetting of the cipher key will be |
|
| executed. |
|
|
|
Only available when a Hard Disk (option) is fitted.
ITEM | SETTINGS | EXPLANATION |
|
|
|
Check File System | Execute | Resolves mismatch between actual memory and |
|
| displayed memory available in a file system. Performs |
|
| administration data (FAT information) recovery. |
|
| Performs recovery only for an HDD. |
|
|
|
Check All Sectors | Execute | Performs recovery of defective HDD sector information |
|
| and a file system mismatch mentioned above. The target |
|
| device is only a HDD and it takes 30 to 40 minutes to |
|
| complete this function for an HDD of 10GB. |
|
|
|
Enable HDD | Yes | Even if a machine is inoperable at installation because of |
| No | a faulty HDD, the machine can be made operable by |
| setting this parameter to No (ignores the existence of | |
|
| |
|
| the HDD). |
|
| When No is set, access to a HDD results in FAIL because |
|
| the HDD is regarded as not attached. |
|
| After setting change and exit from the menu, the printer |
|
| will restart. |
|
|
|
Menu functions - C821 and C830 > 67