CALIBRATION

ITEM

 

SETTINGS

EXPLANATION

 

 

 

 

Auto Density

 

On/Off

Enables/disables automatic density adjustment.

Mode

 

 

 

 

 

 

 

Adjust Density

 

Execute

If Execute is selected, the printer will immediately

 

 

 

adjust density and reflect it in TRC compensation.

 

 

 

This adjustment must be executed when the

 

 

 

printer is idling. It can become invalid if executed

 

 

 

in any other state.

 

 

 

 

Adjust

 

Execute

When this menu is selected, the printer performs

Registration

 

 

AutoAdjust Registration.

 

 

 

This adjustment must be executed when the

 

 

 

printer is idling.

 

 

 

 

Print Tuning

 

Execute

Prints the pattern for the user to adjust TRC.

Pattern

 

 

Ordinarily, this function is not needed because TRC is

 

 

 

automatically adjusted to the recommended levels

 

 

 

through density adjustment and TRC compensation.

 

 

 

Adjustment results will be reflected as offset values

 

 

 

(addition) to the corrections through the Adjust

 

 

 

Density/TRC Compensation function.

 

 

 

 

Cyan/Magenta/

Highlight

-3,-2,-1,

Adjusts HIGHLIGHT (light area) of the TRC.

Yellow/Black

 

0,+1,+2,+3,

+ = Darker

Tuning

 

 

 

 

- = Lighter

 

 

 

 

 

 

 

 

Mid-Tone

-3,-2,-1,

Adjusts MID-TONE area of the TRC.

 

 

0,+1,+2,+3,

+ = Darker

 

 

 

 

 

 

- = Lighter

 

 

 

 

 

Dark

-3,-2,-1,

Adjusts DARK area of the TRC.

 

 

0,+1,+2,+3,

+ = Darker

 

 

 

 

 

 

- = Lighter

 

 

 

 

Cyan/Magenta/

 

-3,-2,-1,

Adjusts the engine density.

Yellow/Black

 

0,+1,+2,+3,

The Darkness settings for each of CMYK will be

Darkness

 

 

 

 

reflected as offset values (addition) to the corrections

 

 

 

 

 

 

through the Adjust Density/TRC Compensation

 

 

 

function.

 

 

 

 

Menu functions - C821 and C830 > 65