ITEM

 

SETTINGS

EXPLANATION

 

 

 

 

HDD Setup

Format

PCL

Formats a specified partition.

(cont.)

Partition

Common

When the Enter button is pressed, the following

 

 

 

 

PS

confirmation message appears.

 

 

 

 

 

 

Are You Sure? Yes/No

 

 

 

If No is selected, you will return to the previous menu.

 

 

 

If Yes is selected, the following confirmation message

 

 

 

appears.

 

 

 

Execute Now? Yes/No

 

 

 

If No is selected, you will return to the previous menu.

 

 

 

The request to execute partition formatting is put into the

 

 

 

memory and formatting will be executed at next power

 

 

 

cycle.

 

 

 

If Yes is selected, shutdown takes place and the partition

 

 

 

is formatted at power Off/On cycle.

 

 

 

In Non-PS machines, PS is replaced by Common, so the

 

 

 

message is displayed as “PCL/Common/Common”.

 

 

 

 

System

Near Life

Enable/Disable

Sets the LCD display control whennear life warning of a

Setup

Status

 

drum, fuser or trancfer belt occurs.

 

 

 

ATTENTION LED is lit if ENABLED

 

 

 

 

 

Near Life

Enable/Disable

Controls the settings of the Attention LED when near end

 

LED

 

of life warning of toner, drum, fuser, or belt occurs.

 

 

 

Attention LED is lit when enabled, not lit if disabled.

 

 

 

(Displays LCD message.)

 

 

 

The temporary recovery by opening and closing of the

 

 

 

cover in Life error is not included.

 

 

 

 

Change

New

xxxxxxxxxxxxxx

Sets a new password to enter Admin Setup menu

Password

Password

 

From 6 to 12 alpha/numeric digits can be entered.

 

 

 

 

 

 

 

 

Verify

xxxxxxxxxxxxxx

Forces the User to input the new password to enter Admin

 

password

 

Setup.

 

 

 

From 6 to 12 alpha/numeric digits can be entered.

 

 

 

 

Settings

Reset

Execute

Resets EEPROM of CU. Resets User menu to the factory

 

Settings

 

default.

 

 

 

If Execute is selected, exits from the menu.

 

 

 

 

 

Save

Execute

Saves menus currently set. With this function, the menus

 

Settings

 

with which operation was last performed are saved, and

 

 

 

overwrites with them menus that were previously saved.

 

 

 

When the Enter button is pressed, the following

 

 

 

confirmation message appears.

 

 

 

Are You Sure? Yes/No

 

 

 

When No is selected, the preceding menus are restored.

 

 

 

When Yes is selected, the current menu settings are

 

 

 

saved and this menu is exited.

 

 

 

 

Menu functions - C821 and C830 > 64