Oki C821 Power setup, Storage setup, Language setup

ITEM	SETTINGS	EXPLANATION
Erase HDD	Execute	Deletion of all data stored in the hard disk. DoD
		5220.22-M sanitizing formula is used for clearing the
		disk. The machine will restart after changing setup. The
		following message appears after pressing the Enter
		switch.
		Are You Sure?
		Yes
		No
		If NO is selected, you will be returned to the source
		menu
		If Yes is selected the procedure for clearing disk will
		start immediately after the machine reboots.
		If the Cancel button is held down during erasing, the
		following confirmation messages will appear to
		discontinue processing.
		Do You Wish to Cancel?
		Yes
		No
		If NO is selected, the procedure will continue. If YES is
		selected, the procedure will discontinue.
Enable initialization	No	Prevents a setting change accompanying initialization of
	Yes	Block Device (HDD,FLASH).

Storage setup

ITEM	SETTINGS	EXPLANATION
Enable initialisation	Yes/No

Power setup

ITEM	SETTINGS	EXPLANATION
Peak Power Control	Normal/Low	Sets peak Power control level.
Power Save	Enable	Sets Enable/Disable of Power Save Mode.
	Disable
USB Host Power	Off/On	Sets power supply for USB-HOST of the whole power
		save mode.
		When Off, suppress power supply.
		When On, do normal power supply.

Language setup

ITEM	SETTINGS	EXPLANATION
Language Initialize	Execute	Initialises the message file loaded in FLASH.
		When you press the Enter button, the following
		message, requesting confirmation, will appear,
		Are You Sure?
		Yes
		No
		If NO is selected, you will be returned to the source
		menu.
		The procedure for clearing the disk will start immediately
		after the menu and rebooting.

Menu functions - C821 and C830 > 68