ITEM

SUB-MENU

 

SETTINGS

EXPLANATION

 

 

 

 

 

 

MAINTENANCE

 

ENABLE/

Enables/disables the maintenance menu. If

 

MENU

 

DISABLE

DISABLE is selected, this menu will not appear.

 

 

 

 

 

 

USAGE MENU

 

ENABLE/

Enables/disables the usage menu. If DISABLE is

 

 

 

DISABLE

selected, this menu will not appear.

 

 

 

 

 

 

Config Menu

 

 

 

 

 

 

 

NEARLIFE

 

ENABLE/

Enables/disables the LED control when NearLife

 

STATUS

 

DISABLE

warning of a toner, drum, fuser, or belt occurs.

 

 

 

 

Attention LED is lighted when enabled, not lighted

 

NEARLIFE LED

 

ENABLE/

 

 

when disabled. (Displays LCD message).

 

 

 

DISABLE

 

 

 

The status (Life warning) of temporay recovery by

 

 

 

 

 

 

 

 

opening and closing of the cover is not included.

 

 

 

 

 

 

PEAK POW

 

NORMAL/LOW

Sets level of peak power control.

 

CONTROL

 

 

 

 

 

 

 

 

 

FILE SYS MAINT1

 

 

 

 

 

 

 

FLASH

 

EXECUTE

Initializes the resident flash memory.

 

INITIALIZE

 

 

The following message appears when pressing the

 

 

 

 

 

 

 

 

enter button.

 

 

 

 

ARE YOU SURE?

 

 

 

 

YES/NO

 

 

 

 

If NO is selected, the printer will go back to the

 

 

 

 

source menu. If YES is selected, the printer will be

 

 

 

 

automatically rebooted and initialize the flash

 

 

 

 

memory.

 

 

 

 

 

 

FILE SYS MAINT2

 

 

 

 

 

 

 

INITIAL LOCK

 

YES/NO

If YES is selected ADMIN MENU will not appear -

 

 

 

 

FILE SYS MAINT !

 

 

 

 

 

 

LANGUAGE MENU

 

 

 

 

 

 

 

LANG

 

EXECUTE

Initializes the message file loaded in flash memory.

 

INITIALIZE

 

 

The following message for confirmation will appear

 

 

 

 

 

 

 

 

by pressing the enter button.

 

 

 

 

ARE YOU SURE?

 

 

 

 

YES/NO

 

 

 

 

If NO is selected, the printer will go back to the

 

 

 

 

source menu. The procedure for clearing disk will

 

 

 

 

start immediately after the menu is rebooted

 

 

 

 

 

CHANGE PASSWORD

 

 

 

 

 

 

NEW

 

**********

Set a new password for entering administrator’s

 

PASSWORD

 

 

menu.

 

 

 

 

From 4 to 12 alpha/numerical digits can be entered.

 

 

 

 

 

 

VERIFY

 

**********

Verifies the new password set above.

 

PASSWORD

 

 

 

 

 

 

 

 

Menu functions - C801 and C810 > 46