Oki C821 USB MENU, NETWORK MENU

USB MENU

This menu controls the operation of the printer’s USB data interface.

ITEM	SETTINGS	EXPLANATION
SOFT RESET	ENABLE /	Enables or disables the SOFT RESET command.
	DISABLE
SPEED	12 / 480 Mps	Selects the interface speed.
SERIAL NUMBER	ENABLE / DISABLE	Specifies whether to ENABLE or DISABLE a USB serial
		number.
		The USB serial number is used to identify the USB device
		connected to your PC.

NOTE:

When you have changed any settings in the USB MENU, turn the printer OFF, then ON again.

NETWORK MENU

This menu controls the operation of the printer’s 10Base-T/100Base-TX network interface.

ITEM	SETTINGS	EXPLANATION
TCP/IP	ENABLE /	Enables or disables this network protocol.
	DISABLE
NETBEUI	ENABLE /	Enables or disables this network protocol.
	DISABLE
IP ADDRESS SET	AUTO / MANUAL	Specifies whether IP address allocation is automatic
		(DHCP) or manually assigned.
IP ADDRESS	xxx.xxx.xxx.xxx	Current assigned IP address. To change, press ENTER and
		use up or down buttons to increment 1st octet, then press
		ENTER again to move on to next octet. When 4th octet
		has been set, press ENTER again to register new address.
SUBNET MASK	xxx.xxx.xxx.xxx	Current assigned subnet mask. To change, proceed as
		above.
GATEWAY ADDRESS	xxx.xxx.xxx.xxx	Current assigned gateway address. To change, proceed as
		above.
WEB	ENABLE /	Enables or disables Web config. facility.
	DISABLE
TELNET	ENABLE /	Enables or disables Telnet config. facility.
	DISABLE
FTP	ENABLE /	Enables or disables communication via FTP.
	DISABLE
SNMP	ENABLE /	Enables or disables SNMP protocol.
	DISABLE
NETWORK SCALE	NORMAL / SMALL	Selects network size.
HUB LINK SETTING	AUTO	Sets full or half duplex for communication via a network
	NEGOTIATE	hub.
	100BASE-TX FULL
	100BASE-TX HALF
	10BASE-T FULL
	10BASE-T HALF

Menu functions - C801 and C810 > 43