ITEM

 

SETTINGS

EXPLANATION

 

 

 

 

HDD Setup

This item is displayed only if a HDD (option) is installed.

 

 

 

 

 

Initialize

Execute

Initializes the HDD to the factory default setting. Machine

 

 

 

performs partition-division, and initializes each partition.

 

 

 

When this menu is executed, the following confirmation

 

 

 

message appears.

 

 

 

Are You Sure? Yes/No

 

 

 

If No is selected, you will return to the previous menu.

 

 

 

If Yes is selected, the following confirmation message

 

 

 

appears.

 

 

 

Execute Now? Yes/No

 

 

 

If No is selected, you will return to the previous menu.

 

 

 

The request to execute HDD initialization is put into the

 

 

 

memory and initialization will be executed at the next

 

 

 

power cycle.

 

 

 

If Yes is selected, shutdown takes place, and the HDD is

 

 

 

initialized at power Off/On cycle.

 

 

 

 

 

Resize

PCL nn%/

Specifies the size of partition. Specifies a size by ratio to

 

Partition

Common mm%/

the whole HDD in % (1% unit).

 

 

PSll%/<Apply>

nn,mm,ll: 1 - 98 and nn+mm+ll=100

 

 

 

 

 

 

The sizes are displayed in the partition list and can be

 

 

 

changed by selecting the partition size to be changed. If

 

 

 

Apply is selected, the following confirmation message

 

 

 

appears.

 

 

 

Are You Sure? Yes/No

 

 

 

If No is selected, you will return to the previous menu.

 

 

 

If Yes is selected, the following confirmation message

 

 

 

appears.

 

 

 

Execute Now? Yes/No

 

 

 

If No is selected, you will return to the previous menu.

 

 

 

The request to execute the partition size change request

 

 

 

is put into the memory and the hard disk initialization and

 

 

 

partition size change will be executed at next power cycle.

 

 

 

If Yes is selected, shutdown takes place. Hard disk

 

 

 

initialization and partition size change will be executed at

 

 

 

Power Off/On cycle. (If one partition size is modified, the

 

 

 

others are also modified.) If any partition size is modified,

 

 

 

Initialization of HDD needs to be executed as well.

 

 

 

If a previously used HDD is installed, HDD initialization

 

 

 

also takes place. If a HDD, which has been used before, is

 

 

 

installed, the layout of this menu may be different from

 

 

 

that of each partition. (The previously used layout will be

 

 

 

displayed.)

 

 

 

In Non-PS machines, PS is replaced by COMMON, so the

 

 

 

message is displayed as “PCL/COMMON/COMMON”.

 

 

 

 

Menu functions - C821 and C830 > 63