%3.3.12 Transfer Roller
3.3.12 Transfer Roller
Special Note:
Handling the transfer roller unnecessarily will cause poor print quality.
Do not
touch the
surface of the roller.
(1) With the power switch turned off, unplug the AC power cord from the outlet.
(2) Open the stacker cover.
(3) From the top of the machine, release TR gear 1 by unlocking the latch 4 of the main unit with a small
flathead screwdriver (never apply an excessive force when unlocking the latch).
(4) Lift the right side of the transfer roller 2, and shift it to the right side, then pull it out from the main unit
(at this time, the bearings 3 of the left and right sides of the transfer roller 2 will release themselves).
Note:
Use great care: the bearings are not permanently attached.
Note:
Use care when removing the
roller: do not lose or damage the bearing.
OKI OL600/610ex (96-01-18