%3.3.14 Fusing Pressure Roller3.3.14 Fusing Pressure Roller
(1) Remove the upper cover (see 3.3.1).
(2) Remove the stacker cover assy (see 3.3.10).
(3) Remove the lower base unit (see 3.3.7).
(4) Remove the fusing unit assy (see 3.3.13).
(5) Remove the motor assy (see 3.3.8).
(6) Remove the reset lever R (see 3.3.10 for location). Press down on the fusing pressure roller to take
pressure off of the reset lever R.
(7) Lift the right side of the fusing pressure roller 1, and pull it out to the right side (at this time, two
bushings 2 and the bias springs 3 will release themselves).
Note:
• Do not bend or lose springs. • Note the orientation and position of the bearings, springs, and
ground clips.
OKI OL600/610ex (96-01-18