%4.2 Adjustment When Replacing a Part
4.2 Adjustment When Replacing a Part
Adjustment is necessary when replacing any one of the following parts.
Part Replaced Adjustment
LED Head Set the LED head drive time.
Image Drum Cartridge Reset the image drum counter (refer to User's
manual).
4.2.1 Setting of LED Head Drive Time
Note:
When the luminous intensity marking of the replacement LED head (new part) is same as that of
the removed LED head (old part), do not set the LED head drive time.
• Luminous Intensity Marking Label
• Setting of LED Head Drive Time
Drive time of the LED head is set by setting the parameter of drive time of EEPROM according to the
lumious intensity marking on the LED head.
a. Table of lumious intensity marking and drive time parameter
Luminosity intensity
marking on LED head Drive Time parameter Luminosity intensity
marking on LED head Drive time parameter
OKI OL600/610ex (96-01-18