%1.3 Engine Maintenance Menu
1.3 Engine Maintenance Menu
• The engine maintenance menu is activated when the power is turned on while holding down the Form
Feed key and the Enter key.
• The method for exit from this menu depends on the setting.
• The engine maintenance menu provides the following functions:
(1) Head Drive Time Setting
• Sets the drive time of the LED head.
• For setting instructions, see page 4-3.
(2) Printing Start Position Setting
• Sets the printing start position.
(3) Drum Count Total Display
• Displays on the LCD the total number of drum revolutions of the unit, counted at the engine block.
(4) Drum Count Display
• Displays on the LCD the total number of EP drum revolutions counted at the engine block.
(5) Factory Adjustment (for High Capacity Second Paper Feeder/Multi-Purpose Feeder)
• Do not change the default settings.
(6) Engine Reset
• All EEPROM areas used by the engine block are reset to the factory default values.
• The following items are excluded:
Menu level-1
Menu level-2
Operator panel menu disable/enable
Page print disable/enable
• Transition to the operation mode occurs upon completion of resetting.
Fig C-2: Engine Maintenance Menu System
OKI OL600/610ex (96-01-18