3

’98 03 21

10:35

110
E

TURNING ON THE LCD MONITOR

DISPLAYING PICTURES ONTHE LCD MONITOR
After taking a picture, you can immediately view it
on the LCD monitor.
Close the lens barrier and press the LCD monitor ON/OFF
button to turn on the LCD monitor.
●When the monitor is turned on, the camera automatically
checks the card. If there is no card in the camera, the Card
error indicator blinks on the control panel. If the card is in
another format and is unreadable, the camera enters the
Card format mode. (p. 58)
●The last picture taken is displayed on the LCD monitor.
The frame number and the battery check indicator are also
displayed, as well as the Date, Resolution, and Protect
indicators if they are set. When there are no pictures
stored in the card, a blank blue screen is displayed.
●Resolution, Battery Remaining, Date and Frame number
indicators will disappear after about three seconds. If the
batteries are low, the low-battery indicator appears and
blinks. Cancel the picture protection in order to make the
Protect indicator disappear. (p. 120)
◆When turned on, the LCD monitor flashes, and
pictures appear a few seconds later. This is not a
malfunction.
Note: