76
E
6When you close the lens barrier, all control panel
indications disappear and the power turns off.
●Even after turning off the power or replacing the batteries,
pictures remain stored in the memory.
●Whenever the Writing indicator blinks, it means that the
camera is still processing the image. If you press the
Shutter release button while the indicator is blinking, the
shutter will not release.
◆When the camera is being operated on battery
power and the batteries are running low, the
camera may emit several short beeps and blink
the number of remaining pictures on the control
panel after you take a shot or when you open the
lens barrier. If this happens, the picture you have
just taken will not turn out properly. Replace the
batteries and take the picture again.
◆The image size of a print is bigger than what you
see in the viewfinder or on the LCD monitor.
Note: