156
E
TROUBLESHOOTING

Operating Problems

The camera does not work.
1The power is OFF.
[Open the lens barrier to turn on the power. (P. 56)
2The batteries are loaded incorrectly.
[Reload the batteries correctly. (P. 48)
3The batteries are exhausted.
[Replace the batteries with new ones. (P. 48)
4The batteries are temporarily unable to function.
[Keep the batteries warm while using the camera.
No picture is taken when the Shutter release button is
pressed.
1The flash has not finished charging or the previous picture
is being written into the SmartMedia.
[Remove your finger from the Shutter release button
and wait until the Condition indicator LED stops blinking.
(P. 74)
2SmartMedia is full.
[Replace the SmartMedia, erase unwanted pictures, or
transfer the entire picture data to a PC and erase the
data. (P. 122/124)
3No SmartMedia is in the camera or it is protected.
[Use a new SmartMedia.
The flash does not fire.
1The flash mode is in the Off mode.
[Set the flash mode to something other than the Off
mode. (P. 88)