12
SET OK
OK
118
E
SLIDE-SHOW MODE

You can run through all the stored pictures

automatically.

This function works when the lens barrier is closed.
1Display the picture by turning on the LCD monitor ON/OFF
button (green button on rear).
2Press the Function button to select the Slide-Show mode,
then press the OK (Shutter Release) button to start the
Slide-Show.
3Press the Function button again to stop at the currently
displayed picture.
●The Slide-Show does not stop until you cancel the
operation. Press the Function button to stop it. (The power
turns off automatically after about 30 minutes regardless of
the power source.)
●The Slide-Show is also available in the Index-Display mode.
(p. 114)