Olympus DS-7000 Inserting the battery, Polarity as shown in the illustration, Battery indicator

Inserting the battery

This recorder uses a lithium ion battery specified by Olympus (LI-42B). Do not use any other type of battery.

1Lightly press down on the battery cover release button, then open the battery cover, as shown in the illustration below.

Battery indicator

The battery indicator on the display will decrease as the battery loses power.

1

Inserting the battery

		•	When [ ] appears on the display, charge the
			battery as soon as possible. When the battery is
			too weak, [s] and [Battery Low] will appear on
3	1		the display and the recorder will shut down.
			Notes
	2	•	Turn off the recorder before removing the battery.
			Removing the battery while the recorder is still in
			use may cause malfunctions, file corruption or file
			loss.
		• Remove the battery if you are not going to use the
2 Insert the battery observing the correct			recorder for an extended period of time.
		•	After removing the battery, it could be necessary
polarity as shown in the illustration,			to set again the time and date if you left the
then close the battery cover.			recorder without battery for more than 15
• Insert the battery by sliding in direction A			minutes or if you removed the battery right after

while pushing down in direction B. loading it into the recorder.

EN

12

•The supplied battery is not fully charged. It is recommended to fully charge it before using the recorder for the first time or after the battery has been left unattended for a long time (☞ P.13).