Olympus DS-7000 manual Recording monitor

Hands-free recording Recording monitor

The recorder can be used as a hands-free recording device. To set up the recorder for hands-free operation, connect the optional Olympus Foot Switch to the back of the docking station and place the recorder in the docking station as shown in the illustration below.

You can set the Hands-free function of the recorder to [Dictation] (default) of [Transcription] by using the customize functions of the ODMS software (☞ P.44). Using the ODMS software you can also change the functions of the foot pedals.

2For more details, refer to the online help for ODMS software (☞ P.47).

Hands-free recording/ Recording
monitor	Notes
	• Move the slide switch to the STOP (4) position
	before connecting it to the docking station for
	hands-free recording.
	• To record with better quality using the hands-free
	recording function, set the microphone sensitivity
	to [Conference] mode (☞ P.37), or use an external
	microphone.

EN

It is possible to monitor your recording by listening to it even while the recording is in progress. In order to do so, insert the earphone plug into the earphone jack and use the + or – buttons to control the volume level.

+, − (Volume) button

Notes

•When connecting an earphone or an external microphone’s plug, insert the plug all the way in as shown in the illustration above.

•To avoid irritation to the ear, insert the earphone after turning down the volume level.

•Do not place earphones near a microphone as this may cause feedback.

24