Olympus DS-7000 manual Menu items, LCD/Sound Menu, Adjust the start/stop actuation level, Items

Models: DS-7000

1 56
Download 56 pages 29.63 Kb
Page 38
Image 38

Menu items

When the sound volume is lower than the preset actuation sound level, recording automatically stops after 1 second approximately, and [Standby] flashes on the display. The record indicator light turns on when recording starts and flashes when recording pauses.

LCD/Sound Menu

Backlight

By default, the display will remain lit for about

10 seconds when a button on the recorder is pressed.

3

Menu

a VCVA indicator

b Level meter (varies according to the sound volume being recorded)

a

b

1Select [Lighting Time], [Dim Light Time] or [Brightness].

2Select the options.

When [Lighting Time] is selected:

[5seconds] [10seconds] [30seconds] [1minute]: Set the backlight duration.

When [Dim Light Time] is selected:

[30seconds] [1minute] [2minutes] [5minutes] [Always On]:

Set the time after which the backlight dims.

items

EN

38

Adjust the start/stop actuation level:

While the recorder is in recording mode, press the 9or 0button to adjust the actuation level.

The VCVA level can be set to any of 15 different values.

The higher the value is, the more sensitive the recorder can react to sounds. At the highest value, even the faintest sound will activate recording.

The VCVA actuation level can be adjusted according to the ambient (background) noise.

C Start level (moves to the right/left according to the set level)

c

The start/stop actuation level also varies depending on the selected microphone sensitivity mode (P.37).

To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is recommended.

When [Brightness] is selected: [01] [02] [03]:

Sets the brightness of the backlight when lit.

LED

You can set it so the record indicator light does not turn on.

[On]:

LED light will be set. [Off]:

LED light will be canceled.

Beep

When the Beep is set to [On], the recorder will beep in case of error.

[On]:

Beep is enabled. [Off]:

Beep is disabled.

Language (Lang)

You can set the language for the recorder’s user interface.

[Česky] [Dansk] [Deutsch] [English] [Español] [Français] [Nederlands] [Polski] [Русский] [Svenska]:

The languages available may vary depending on the country/region where the product is purchased.

Page 38
Image 38
Olympus DS-7000 manual Menu items, LCD/Sound Menu, Adjust the start/stop actuation level, Items