Olympus DS-7000 manual Recording, New recording, Press the NEW button to create a new file

Recording

New recording

1 Create a new file to record in.

1 Press the NEW button to create a new file.

• It is possible to select the Work Type from the	a
work type list by using the ODMS software
(☞ P.44).
a New file number	b
b Remaining recording time

2 2 Move the slide switch to the REC (s)

position to start recording.

• The record indicator light turns on. Turn the microphone in the direction of the source to be recorded.

3Move the slide switch to the STOP (4)

2 position to stop recording.

• If you want to append additional recordings to the same file, move the slide switch to the REC (s) position again.

2

Recording

3Notes

•During recording, a beep will sound whenever the remaining recording time reaches 60, 30, and 10 seconds.

•When the remaining recording time is less than 30 minutes, the color of the remaining memory bar indicator will change.

•When the remaining recording time reaches 60 seconds, the record indicator light will start flashing. The light will flash faster when the remaining recording time decreases from 30 to 10 seconds.

•[Memory Full] or [Folder Full] will be displayed when the memory or folder capacity is full.

−Delete unnecessary files before recording any further (☞ P.27) or transfer dictation files to your PC (☞ P.46).

−Change the recording media at [Card Select] setting (☞ P.39) or change to a card with free space.

EN

21