Olympus DS-7000 manual Index marks, F3 Index button

Index marks

3

Index marks

Index marks can be placed into a file during recording or playback. Index marks are used to provide a quick and easy way to identify important or significant parts within the file.

Setting an index mark

1While the recorder is in recording mode or in playback mode, press the

F3 (INDEX) button.

Locating an index mark

Clearing an index mark

1Select a file in which index marks you wish to erase are contained.

2Press the 9or 0button to select the index mark to erase.

3While the index number appears for approximately 2 seconds on the display, press the ERASE button.

• The index mark is erased.

Notes

•Up to 32 index marks can be set into a file.

•When a file is locked or set to read-only, or when the SD card is locked, index mark cannot be erased.

•If the recorder has been set to DSS Classic mode, index marks are limited to a maximum of 16 for each file.

2While playing back a file, press and hold the 9or 0button.

•The recorder stops for 1 second when it reaches the index mark.

EN

34