Olympus DS-7000 manual Memory card, Inserting and ejecting a SD card

Memory card

Inserting and ejecting a SD card

Inserting a SD card

Insert the SD card fully into the card slot, facing the direction shown in the illustration below, until it clicks into place.

•Insert the card keeping it straight.

Card recognition

After inserting SD card, the message

[Please Wait] will flash on the display while the recorder recognizes the SD card.

Ejecting a SD card

Push the SD card inward to unlock it and let it come out of the slot.

•Hold the card straight and pull it out.

Notes

•Inserting the card the wrong way or at an angle could damage the contact area or cause the card to jam.

•If the card is not inserted all the way into the slot, data may not be written properly.

•When an unformatted card is inserted into the card slot, the recorder will automatically display the format menu options (☞ P.42).

•Use only cards formatted with the recorder (☞ P.42).

•Never remove the card while the recorder is operating, as this may damage the data.

•After pushing the card inward to eject it, releasing your finger too quickly may cause the card to be ejected unexpectedly.

•This recorder uses a microSD card as internal memory. The microSD card has been preloaded.

•The recorder may not recognize properly even cards compatible with it.

•The processing performances reduce in a card when you repeat writing and deleting. In this case, format the card (☞ P.42).

1

Memory card

EN

17