Olympus DS-7000 manual Device lock function, Authentication halt mode

Device lock function

Access to the recorder can be restricted by using the Device Lock function. Password authentication can be safer for your data in case the recorder is lost. The password can be set by using the ODMS software (☞ P.44).

When the password has been registered, you will be asked for it on start-up.

1Use the +, –, 9or 0buttons to select a number.

2Press the OK/MENU button to set a number.

•A [] will appear in the selected first digit and the flashing cursor will move to the next one over (to the right). Repeat steps 1 and 2 to enter all four digits.

•Pressing the ERASE button at any time will erase the last entry and move the cursor to the previous entry (to the left).

3After all four digits have been entered, press the F2 (ENTER) button.

•If the 4 digit number entered matches the registered password then the start-up message will appear and the recorder will start-up.

•The default password when using the ODMS software to set the password for the first time is “0000”.

Authentication halt mode

If the password does not match after five consecutive tries, the recorder will enter into authentication halt mode for ten minutes. After ten minutes the password history will be deleted, and the recorder will return to the password input screen.

3

Device lock function

EN

31