Olympus LS-20M 19

		Power supply

Charging by connecting to a computer		The charging process will start.
Charging by connecting to a computer	4	The charging process will start.
via USB

You can charge the battery by connecting to a PC's USB port. When charging, be sure to correctly place the rechargeable battery (supplied) into the recorder (☞ P.17).

Before connecting the USB cable, exit

HOLD mode (☞ P.24).

1Boot the PC.

2Connect the USB cable to the USB port of the PC.

3While the recorder is during stop mode or turned off, connect the USB cable to the connecting terminal on the bottom of the recorder.

.5 Charging is completed when [Battery Full] is displayed.

Charging time: approximately 2 hours *

*It shows the approximate time when charging the rechargeable battery fully from no remaining power at the room temperature. The charging time will be changed depending on the remaining amount and the state of battery.

Battery indicator

The battery indicator on the sub LCD changes as the battery lose power.

•When [æ] appears on the sub LCD, charging

the battery as soon as possible. When the battery is too weak, [s] and [Battery Low] will appear on the display and the recorder will shut down.

•While charging, the battery indicator constantly changes and does not show the actual amount of power remaining.

supply Power