How to begin segment repeat playback A N

This function enables repeated playback of part of the file being played.

A-B REPEAT button

1Select a file that has a segment you would like to play back repeatedly, and start playback.

2Press the A-B REPEAT button at the point you want to start segment repeat playback.

•[w] will flash on the sub LCD.

•Fast forwarding and rewinding can be conducted when [w] is flashing in the same manner as during normal playback, and you can quickly proceed as far as the end position (☞ P.49).

•When it reaches the end of the file while [w] is flashing, point [x] becomes the end of the file, and repeat playback will start.

3Press the A-B REPEAT button again at the position where you want to end segment repeat playback.

•The recorder continuously plays back the segment until the segment repeat playback is canceled.

Note

•If an index mark is placed or cleared during segment repeat playback, segment repeat playback will be canceled and it will return to normal playback mode (☞ P.52).

Canceling the segment repeat playback function

Pressing any of the following buttons will release the segment repeat playback.

APress the `OK or STOP (4) button

Pressing the `OK or STOP (4) button will release segment repeat playback, and stop playback.

BPress the 9button

Pressing the 9button will release segment repeat playback, and make the recorder to skip to the beginning of the next file.

CPress the 0button

Pressing the 0button will release segment repeat playback, and make the recorder to skip to the beginning of the current file.

DPress the A-B REPEAT button

Pressing the A-B REPEAT button will release segment repeat playback, and it will return to normal playback mode.

3

NA playback repeat segment begin to How

EN

57