2

A recording Before

About recording/shooting

Before recording A

Getting Ready

Changing modes:

Select the recording format:

Slide the mode switch on the recorder to A

Recording can be performed through the

(☞ P.33).

linear PCM format, as well as the MP3 formats

 

(☞ P.65).

Turn the microphone toward the original sound source

Turn the built-in stereo microphone in the direction that you would like to record. Placing the built-in stereo microphone over the display is the proper position for performing stereo recording. If it is below the display when recording then proper stereo recording cannot be performed because the position of the original sound will be recorded in reverse phase.

Original sound source

When recording with the built-in microphone:

EN Turn the microphone in the direction of the source 34 to be recorded.

About the built-in stereo microphone:

The extension of the microphone sensitivity can be adjusted by changing the [Mic Sense] setting to [High] or [Low] (☞ P.65).

MIC SENSE HIGH

MIC SENSE LOW

LR

Key map

On mounting:

Accurate adjustments of the microphone’s angle and the like can be made when the device is affixed to a commercially available tripod used for cameras.