Setting time and date [Time & Date]
Setting the time and date beforehand enables easier file management.
The recorder stores the time information automatically with the recording.
When you use the recorder for the first time after purchasing it, or when the battery have been inserted without the device having been used in a long time, the [Set Time & Date] will appear. When the “Hour” is flashing, conduct the setup from Step 1.
+− button
90button 
`OK button
1Press the 9or 0button to select the item to set.
•Select the item from the “Hour”, “Minute”, “Year”, “Month” and “Day” with a flashing point.
2Press the + or − button to set.
•Follow the same steps by pressing the 9
or 0button to select the next item, and pressing the + or − button to set.
•You can select between 12 and 24 hour display by pressing the LIST button while setting the hour and minute.
Example: 10:38 P.M
10:38 PM |
| 22:38 |
(Initial setting) |
| |
|
|
•You can select the order of the “Month”, “Day” and “Year” by pressing the LIST button while setting them.
Example: March 24, 2011
3M 24D 2011Y (Initial setting)

24D 3M 2011Y

2011Y 3M 24D
3Press the `OK button to complete the setting.
•The clock will start from the set date and time. Press the `OK button according to the time signal.
1
date and time Setting
EN
25