Setting time and date [Time & Date]

1

date and time Setting

Note

•If you press the `OK button during the setup operation, the recorder will save the items that were set to that point.

Changing the time and date

While the recorder is during stop mode, press and hold the STOP (4) button to display the Time and Date, Remaining Memory and File Format. If the current time and date is not correct, set it using the procedure below.

+ − button `OK button

MENU button

3Press the `OK button to move the cursor to the item to set.

•[Device Menu] will appear on the display.

4Press the + or − button to select [Time & Date].

5Press the `OK button.

•[Time & Date] will appear on the display.

•The “Hour” will flash on the display, indicating the start of the Time and Date setup process.

1While the recorder is during stop mode, press the MENU button.

•The menu will appear on the display (☞ P.63).

2Press the + or − button to select [Device Menu] tab.

•You can change the menu display by moving

EN

the settings tab cursor.

The following steps are the same as Step 1 through Step 3 of “Setting time and date [Time & Date]” (☞ P.25).

6Press the MENU button to close the menu screen.

26