Olympus LS-20M 41

Recording A

Recording the sound of other devices with this recorder:

The sound can be recorded when connecting to the audio output terminal (earphone jack) of the other device and the MIC jack of the recorder with the connecting cord KA333 (optional) for dubbing.

Before you connect an external microphone to the MIC jack, change the [Input Jack] setting to [Line] (☞ P.67).

To audio output terminal of other devices

To MIC jack

Note

•If you are unable to produce a clear recording with this recorder even after adjusting the recording level (☞ P.65), this could potentially be because the output level for the connected devices is too high or too low. When external devices are connected, perform a test recording and then adjust the output level for the external devices.

Recording the sound of this recorder with other devices:

•The sound of this recorder can be recorded using another device. In order to do so, connect the recorder’s EAR jack to the other device’s audio input terminal (MIC jack) using the connecting cord KA334 (optional) for dubbing.

•When connecting to another device with no LINE IN jack but only a MIC IN, use the connecting cord KA333 (optional) equipped with a resistance attenuator for dubbing.

To audio input	To EAR jack
terminal of other
devices

Note

•When you adjust the sound quality settings related to playback on the recorder, the audio output signal sent out from the EAR jack will change as well (☞ P.71).

A Recording