Menu setting method

Rec Monitor A N

Select whether or not to output audio while recording from the earphone jack.

[On]:

Enables the recording monitor function. Sound will be output from the EAR jack.

[Off]:

Disables this function. Sound will not be output from the EAR jack.

Note

•When the external speaker is connected while recording, there is a risk that audio feedback will occur. It is recommended that you use earphones for the recording monitor, or turn [Rec Monitor] to [Off] while recording.

Plug-inPower A N

External microphones which are supported by plug in power can also be used. Whether or not to supply power to external microphones can be configured.

[On]:

When the plug-in power function is activated, power will be supplied to the connected external microphone. Select this when external microphones supported by plug-in power are connected (☞ P.40).

[Off]:

Disables this function. Select this when external microphones not supported by plug-in power are connected.

Notes

•When the [Input Jack] setting is set to [Line], the plug in power function is disabled.

•Turn the plug-in power function to [Off] when an external microphone not supported by plug- in power is connected, as there is the risk that noise may be generated while recording.

•Phantom power cannot be supplied, even when the plug in power function is set to [On].

Input Jack A N

Select whether to use the recorder’s MIC jack to connect an external microphone or as a LINE IN jack to connect an external device.

[Microphone]:

Set this when connecting an external microphone.

[Line]:

Set this when connecting an external device to use the jack as a LINE IN.

Note

•When the [Input Jack] setting is set to [Line], the Low Cut Filter function is disabled (☞ P.66).

V-Sync. Rec A

See “Voice sync recording [V-Sync. Rec] A” (☞ P.76).

4

method setting Menu

EN

67