Recording A
Actually producing the sound you would like to record:
•When a loud sound is produced the level meter will swing all the way over to the right while recording and the PEAK/LED indicator light will turn on. When this happens
the sound will be recorded in a distorted manner since the recording level is too high.
2
Recording | When the level meter |
| |
| is maxed out | ||
| (the recorded sounds will be distorted). | ||
A | • When a loud noise is produced, adjust the | ||
recording level so that the level meter does | |||
| |||
| not exceed [6dB]. | ||
Example of conditions where the recording level has been lowered and the excess input has been adjusted.
4Press the REC (s) button to start recording.
d
| • The recording/shooting indicator light |
| grows and [K] will appear on the sub LCD. |
EN | DElapsed recording time |
|
36
5Press the STOP (4) button to stop recording.
e
•[L] will appear on the sub LCD. EFile length
Notes
•To ensure that you do not lose the beginning of the recording, confirm that the recording is activated by checking the recording/shooting indicator or the mode indicator in the sub LCD.
•When remaining recording time is less than 60 seconds, the PEAK/LED indicator light starts flashing. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.
•[Folder Full] will appear when the recording cannot be made any further. Select other folder or delete any unnecessary files before recording (☞ P.58).
•[Memory Full] will appear when there is no free space. Delete any unnecessary files before recording any further (☞ P.58).
•If the REC (s) button is pressed when a function other than the record function is specified, [Cannot record in this folder] is displayed. Select a folder from [Folder A] through [Folder E] and start recording again.
•Depending on the sound recording mode and the status of record media, the data transfer to the media cannot be done in time during recording and the skipped sound may be recorded. In this case, [Data Write Error] will appear during recording or when the recording is finished. After transferring the data to the PC, format the record media.