19
Input Type (Thermocouple)ENTER INPUT TYPE MENU:
Press a1) Press a, if necessary, until CNFG prompt appears.
Press d2) Display advances to INPT Input Menu.
Press d3) Display flashes T.ç, RTD or PROC (Thermocouple, RTD or
Process). If the displayed input type is T.ç, press ato skip to
step 6 (T.ç stops flashing).
THERMOCOUPLE SUBMENU:
Press b4) Scroll through the available selection to T.ç (flashing).
Press d5) Display shows STRD stored message momentarily and then
T.ç (not flashing).
Press d6) Display flashes previous thermocouple type selection. i.e. J
(see below for types).
Press b7) Scroll through the available thermocouple types to the
selection of your choice.
Press d8) Display shows STRD stored message momentarily and then
advances to the RDG Reading Configuration Menu.
Use the Input Type (Thermocouple) (RTD) or (Process) and verify your
Electrical Installation (see Section 2.3).
Thermocouple Types: J, K, T, E, N, DIN J, R, S, B, C
Display: JKTENDNJ RSBC