5-5SectionR: Routing Table
91
5-5-6 Checking Routing Tables K: Check
K: Check is used to check the routing tables for errors or inconsistencies. If er-
rors are detected, correct the routing tables as described in Error Messages (on
page 92).
Note K: Check checks the routing tables in the computer memory. To check the rout-
ing tables that have been set at a node, use T: Transfer on the Routing Table
Menu to read the tables to the computer, then execute K: Check.
1, 2, 3... 1. Select K: Check from the Routing Table Menu. The routing table check will
start and the check results screen will be displayed.
A message will be displayed in the lower part of the screen according to the
check results as follows:
When no error has been detected: Check OK
When errors are continued on the next page: Continue
When the current screen is the last page: Last page
2. When errors are displayed on multiple screens, use the F4 (Pre Pg) Key, the
F5 (Nxt Pg) Key, the Page Up Key, or the Page Down Key to switch the
screen and display the check results. After confirming the check results,
press the F10 (End) Key.