5-5SectionR: Routing Table
92
The following tables list the error messages that are displayed on the check re-sults screen. After confirming the check results, use “E: Edit” to correct the rout-ing tables, then check them again.•Local Network Table
Error message Meaning Action to be taken
Too many networks The number of networks set
in the table is outside the
allowable range (0 to 16).
Data may have been
damaged.
Initialize the routing tables,
then set them again.
Local netwk addr err The network address
specified in the “Loc Netwk”
column is outside the
allowable range (1 to 127).
Change the network address
to a value between 1 and
127.
SIOU unit No. range
err The unit number is outside
the allowable range (0 to
15).
Change the unit number to a
value between 0 and 15.
Dup local netwk addr The same local network
address is specified more
than once.
Change the local network
address to a unique address.
Dup SIOU unit No.
err The same unit number is
specified more than once. Change the unit number to a
unique number.
•Relay Network Table
Error message Meaning Action to be taken
Too many networks The number of networks set
in the table is outside the
allowable range (0 to 20).
Data may have been
damaged.
Initialize the routing tables,
then set them again.
End netwk addr
range err The end network address is
outside the allowable range
(1 to 127).
Change the network address
to a value between 1 and
127.
Relay netwk addr rng
err The relay network address is
outside the allowable range
(1 to 127).
Change the network address
to a value between 1 and
127.
Relay node addr rng
err The relay node address is
outside the allowable range
(1 to 126).
Change the network address
to a value between 1 and
126.
Dup end netwk addr The same end network
address is specified more
than once.
Change the local network
address to a unique address.
Relay netwk addr err A network address not in the
local network table is
specified as a relay network
address.
Specify one of the network
addresses set in the local
network table.
Error Messages