5-12SectionK: Connection Information
115
Unit number. Otherwise, a confirmation window for initialization will be dis-
played immediately.
Enter the desired Unit number with Numeric Keys, then press the Enter Key.
The following confirmation window will be displayed to ask you to confirm
whether the network parameters are to be initialized.
2. To initialize the network parameters, press “Y” and then the Enter Key. The
network parameters will be initialized.
To cancel the initialization processing, press “N” and then the Enter Key.
5-12 K: Connection Information
Use “K: Connection Information” to display information on node configurations,
connection order, and the number of communications errors for the Optical Ring
Controller Link Network.
“K: Connection Information” has the following menu.
Item Function Page
R: Read Reads and displays the
connection information for
the specified node. Can
also be used to clear the
connection information
(disconnection
information) currently
displayed.
119
L: Retrieve Reads connection
information saved in files
to computer memory.
122
S: Save Saves connection
information in computer
memory to files.
122
P: Print Prints connection
information currently in
computer memory.
123
Note These functions can only be used with Optical Ring Controller Link Networks.

5-12-1 About Connection Information

Connection information is collected from all nodes in a specified Optical Ring
Controller Link Network, and includes data about node configurations and the
number of errors.
Information Displayed
There are 2 display screens for connection information. The information dis-
played is different for the 2 screens as shown in the following table.