One for All Learning Feature, Press the key on the URC-7781, Remote where you want to place

The Learning Feature

The URC-7781 comes with a complete library of pre-programmed codes. After you have set up the URC-7781 for your device, you may find that there are one or more keys that you had on your original remote, which do not have a place on the URC-7781 keypad.

As a convenience, the URC-7781 offers a special Learning feature that allows you to copy any function from your original remote control onto the keypad of the URC-7781.

Before you start:

-Make sure your original remote control is working correctly.

-Make sure neither your URC-7781, nor your original remote control is pointing at your device.

Learning

Example: To copy the “mono/stereo” function from your original TV remote onto the A-key of your URC-7781.

1Place both remote controls (the URC-7781 and your original) on a flat surface. Make sure the ends which you normally point at your device are facing each other. Keep the remotes at a distance of 2 to 5 cm.

2

3

4ENTER x4

Press and hold down MAGIC for about 3 sec. and...

will appear on the screen.

Press ARROW Right...

will appear on the screen.

Press ENTER 4 times… will appear on the screen.

Use the ARROW keys to scroll

to the device mode in which you want to place the learned function (e.g. TV).

INITIAL

SETUP

ADVANCED

SETUP

SELECT MODE & KEY

RCV TV DVD

5

Press the key (on the URC-7781	LEARNING NOW!
remote) where you want to place	PRESS ORIG.KEY
the learned function (Example: A
key). The LED underneath the POWER
key will flash rapidly and...
will appear on the screen.

6Press the key (on your original remote) that you want to copy on the URC-7781. (Example: “mono/stereo” key). The LED underneath the POWER key will light up twice to confirm that the function mono/stereo has been learned successfully onto the A key.

NOTE: If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning.

NOTE: If you want to copy other functions in a different device mode, in step 4 select a different device mode by using the ARROW Left / Right keys and continue with steps 5 and 6.

NOTE: If the display reads LEARNING FAILED, press ENTER to start from “ADD LEARNING” and press ENTER to continue with step 4.

NOTE: If the display reads MEMORY FULL you need to prioritise the functions you want and delete the functions with the lowest priority

7	Press LIGHT once to go back to ADD LEARNING….or…. press and
	hold LIGHT to exit programming mode.

-Use the LIGHT key to return to the previous screen.

-Press and hold down the LIGHT key to return to user mode.

WW W.ONEFORALL.COM 11