One for All URC-7781 warranty Shifted Macro, Delete Key Macro

Extra Features

Macro (Sequence of commands)

Shifted Macro

It is also possible to program a Shifted Macro on any key, except for the following keys:

MAGIC, LIGHT (ESC), ARROW LEFT, ARROW RIGHT, ENTER and the number keys. If for example, you want to program a shifted Macro on the MUTE

key, simply press the MAGIC and the Mute in step 7 on page 20.

NOTES:

-Each KEY MACRO can consist of a maximum of 15 key strokes.

-Make sure that you program a Macro on a spare key that you don’t use in any mode.

-Once you program a Macro on a specific key, the sequence will work regardless of the mode you are using.

-To avoid accidental recordings with the URC-7781, you must press the Record key twice to begin recording. Because of this, we do not recommend to assign a Macro or Shifted Macro to the Record key.

-If you had to hold down a key for a few seconds on the original remote control to get a function, this function may not work in a macro on your URC-7781 remote.

-If you program a Macro on a key, the original function will become shifted (excluding POWER, CH+/- and VOL+/- keys). Press MAGIC then the key to access it. If you place a Macro shifted on a digit key, access the original function by pressing MAGIC twice and then the digit key.

-If a Shifted Macro is placed on the Power, Channel and Volume keys then Sleep and Colour/Brightness will be sacrificed.

-You cannot set the macro on the ARROW Left/Right, ENTER, MAGIC, and LIGHT (ESC) keys.

-If you include the record function in a Key Macro then you have to press the record key twice.

Delete Key Macro

Example: To delete the Key Macro on the A key from page 20.

1

2

3ENTER

4

5ENTER

6

7ENTER

8

9ENTER

10

Press and hold down MAGIC	INITIAL
for about 3 sec. and...
	SETUP
will appear on the screen.
Press ARROW Right...	ADVANCED
will appear on the screen.
	SETUP
Press ENTER...	FUNCTION
will appear on the screen.
Press ARROW Right...	MACRO
will appear on the screen.
Press ENTER...	ADD
will appear on the screen.
	MACRO
Press ARROW Right...	DELETE
will appear on the screen.
	MACRO
Press ENTER...	DELETE
will appear on the screen.
	TIMED MACRO
Press ARROW Right...	DELETE
will appear on the screen.	KEY MACRO
Press ENTER...	PRESS
will appear on the screen.
	MACRO KEY

Press the A key (corresponding the Macro key you want to erase the Key Macro from). The LED underneath the POWER key will light up twice. You will see “DELETE KEY MACRO” on the screen again.

Result: the Key Macro on the A key programmed from page 20 has been deleted.

WW W.ONEFORALL.COM 21