One for All URC-7781 warranty Shifted Learning

The Learning Feature

-Learning is mode specific. To access your learned function, you need to scroll to the appropriate device first.

-A learned function can be assigned to any key except the ENTER, LIGHT (ESC), ARROW Left/Right keys and the MAGIC key.

-If no key is pressed, the URC-7781 will stay for 30 seconds in programming mode.

-After step 5 you have 15 seconds to press the corresponding key on your original remote.

-If you learn a function on another key than the „custom keys“, the original URC-7781 function automatically becomes shifted. You can press MAGIC then the key to access it (this excludes the POWER, Channel and Volume keys and Digits – Press MAGIC twice and then the digit to access it).

-If a Shifted Learned function is placed on the Power, Channel and Volume keys then Sleep and Colour/Brightness will be sacrificed.

-The Learning feature is mode specific. Therefore you can place one learned function per mode on the same key.

-The URC-7781 can learn approximately 50 functions (depending on the original remote).

-You can replace a learned function by placing another learned function on top or by using “Delete Learning from One Key”, “Delete Learning from One Mode”, “Delete Learning from All Modes”.

-Learning should not be done in direct sunlight or under incandescent lights.

-Make sure you are using new batteries before following the learning instructions.

-Upon changing the batteries, your learned functions will be retained.

-It’s not possible to program functions by learning in the Home Theatre mode. However, if a key has been programmed in the original device mode with learning then this function will be carried over to the Home Theatre mode.

Shifted Learning

You can also learn a function on a key of the URC-7781 without sacrificing the original URC-7781 function. The „custom keys“ are an ideal location for this. A Shifted Learning function can also be put on almost any other key except for the following: MAGIC key, ARROW Left / Right, Enter and LIGHT (ESC). To install a Shifted Learning function, simply follow steps 1-7 on the previous page. During step 5, press MAGIC once before you press the key where you are placing the learned function. To access the shifted function, press MAGIC and then the key you have learned on. To access the shifted function on a digit key press MAGIC twice and then the corresponding digit.

12 WWW. ONEFORALL.COM