One for All Setting up the URC-7781, How to set up the URC-7781 to control your devices

Setting up the URC-7781

How to set up the URC-7781 to control your devices

—>When setting up the URC-7781 for the first time please follow steps 1 – 6.

—>If already in User Mode you need to follow steps a and b then 1 - 6.

a		Press and hold down MAGIC for about	INITIAL
		3 sec. and...	SETUP
		will appear on the screen.
b	ENTER	Press ENTER twice...	ADD DEVICE
	x2	will appear on the screen.

Example: To set up the URC-7781 for your Television:

1Find the code for your device in the Code list (page 301 - 315). Codes are list- ed by device type and brand name. The most popular code is listed first. Make sure your device is switched on (not on standby).

If your brand is not listed at all, the URC-7781 gives you the possibility to scan through all the codes contained in the memory for your specific device (in that case, as explained in see step 4, use the ARROW Left / Right keys instead of the digits).

2

3

ENTER

ENTER

The display will read...

Press ENTER.

Select the device you wish to set up using the ARROW left/right keys and confirm pressing ENTER. Now you will see CODE SET UP. Press ENTER again.

ADD DEVICE

ADD DEVICE

PHO TV VCR

		ENTER
4	Simply use the number keys to enter	TV
	the first four-digit device code
		T0556

corresponding to your brand listed

in the code list (pages 301 - 315). The LED underneath the POWER key will light up twice.

5 Aim the URC-7781 at your device and press POWER.

—> IF your device switches OFF, switch your device back ON (e.g. press CH+ to switch ON your TV) and try all the remote’s functions to ensure they are working properly.

—> IF some functions do not work properly or if your device does not respond at all, please try the next four-digit device code listed under your brand (pages 301 - 315).

SEARCH METHOD: Each time you press the ARROW Left of Right key, this will display the previous or next code in the memory and send POWER of that code.

-Do not use the digits to test if the code works as this will change the current code.

-If your device does not respond to the URC-7781 after you have tried all the codes (page 301 - 315) listed for your brand………or…….if your brand is not listed at all…….simply press the “ARROW right” key to scroll to the next code contained in the memory (for your specific device).

6ENTER As soon as all the remote’s functions are working properly press ENTER to store this code.

Make sure to write down your code on page 8 for easy future reference.

6 WWW. ONEFORALL.COM