10
Controls & ConnectorsFor detailed information, refer to the pages in parenthesis.
ASTANDBY/ON button (20)
This button is used to set the DV-CP701 to On or
Standby.
Don’t turn on the power until you’ve completed, and
double checked all connections (page 16).
BSTANDBY indicator (20)
This indicator lights up when the DV-CP701 is in
Standby mode.
CDisc tray (21)
The disc tray has six bays for loading up to six discs.
DDisc tray light
This light illuminates the disc tray. It comes on when the
DV-CP701 is turned on, and is brighter while the disc
tray is open.
EDISC SKIP button (21, 22)
This button is used to select the disc bays (i.e., rotate the
disc tray) when loading or removing discs, and to select
discs for playback.
FDISC SELECT 1–6 buttons (22)
These buttons are used to select discs. Playback starts
automatically when a disc is selected with these buttons.
GOpen/Close [ ] button (21)
This button is used to open and close the disc tray.
HLAST MEMORY button (36)
This button is used with the Last Memory function.
IDIMMER button (29)
This button is used to adjust the display brightness.
JDISPLAY button (37)
This button is used to display information about the cur-
rent disc, title, chapter, or track, including the elapsed
time, remaining time, total time, and so on.
KREPEAT button (31)
This button is used with the Repeat function.
LDisplay
See “Display” on page 11 for more information.
MRemote control sensor (15)
This sensor receives control signals from the remote
controller.
NPrevious [ ] button (25, 28)
This button is used to select the previous chapter or
track. During playback it selects the beginning of the
current chapter or track.
ONext [ ] button (25, 28)
This button is used to select the next chapter or track.
PPAUSE [ ] button (22)
This button is used to pause playback.
QCHAIN MODE button (30)
This button is used with the Chain mode function.
RSTOP [ ] button (22)
This button is used to stop playback.
SPLAY/ENTER [ ] button (22)
This button is used to start playback and to cancel fast
forward and fast reverse. It’s also used to start Chain
mode playback.