36
Advanced Playback—Continued
With the Last Memory function you can resume playback
from where you left off even if another disc has been selected
or the disc has been removed. Last Memory also remembers
the soundtrack and subtitle languages that you were using.
Notes:
•The Last Memory function can store the settings for up to
six DVD-Video discs. When you set the Last Memory
function for a seventh disc, the first disc’s settings are lost.
• The Last Memory function can remember the settings for
one Video CD, and those settings will be lost when another
disc is selected.
• The Last Memory function may not work properly with
some PBC Video CDs.
• The Last Memory function will not work while a menu is
being displayed onscreen.
• The Last Memory function may not work with some
DVD-Video discs.
•Even if you select another disc, or inadvertently turn off the
DV-CP701 during playback, you can resume playback
from the same point when you select the disc again.

Using Last Memory

1During playback, press the
[LAST M] button.
The last memory point for the disc is
stored, the LAST indicator appears, and
“LAST MEM” appears on the display.
If the [LAST M] button is pressed again,
the last memory point will be updated.
2To stop playback, press the Stop
[] button once or twice.
At this point you may choose to
play another disc, or to turn off the
DV-CP701.
3To resume playback, select the disc
and press the Play [ ] button.
The Last Memory dialog box appears, as
shown.
ON STANDBY
SEARCHLAST M MEMORY
CHAIN MODE
REPEAT
A
-
B
RANDOM
DISPLAY
MENU
SETUP
TOP MENU
RETURN
AUDIO ANGLE SUBTITLE
DISC
1
DISC
2
DISC
3
STEP/SLOW
CLEAR
OPEN/
CLOSE
ENTER
+10 0
123
456
789
DISPLAY
LAST MEMORY
DISPLAY
LAST M
ENTER
STOP
PLAY/ENTER
DVD VCD
LAST M
Remote controller
Remote controller
Remote controller Last Memory is set.
Start playback from memory location ?
Yes No Memory Clear
4To resume playback from last mem-
ory point, select “Yes,” and then
press [ENTER].
To start playback from the beginning,
select “No,” and then press [ENTER].
To start playback from the beginning and
delete the last memory point, select
“Memory Clear,” and then press
[ENTER].
ENTER
Remote controller