Digital Audio (Digital Audio Input) |
|
| Sp Config (Speaker Configuration) | |||||||||
1 | 2 | 3 | 4 | 5 | 6 | 1 | 2 | 3 | 4 | 5 | 6 | |
Advanced Operations
■ Subwoofer |
`Yes |
`No |
■ Front |
`Small |
Menu | Digital Audio |
If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1, you must assign “OPTICAL1” to the “TV/CD” input selector. Here are the default assignments.
Input selector | Default assignment |
BD/DVD | COAXIAL1 |
|
|
VCR/DVR | - - - - - |
|
|
CBL/SAT | COAXIAL2 |
|
|
GAME | OPTICAL1 |
|
|
AUX | - - - - - |
|
|
TV/CD | OPTICAL2 |
|
|
■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD
`COAXIAL1, COAXIAL2, OPTICAL1, OPTICAL2:
Select the input to which the component has been connected.
`- - - -
Select if the component is connected to an analog audio input.
Note
•When an HDMI IN is assigned to an input selector in
“HDMI Input” (➔ page 41), the same HDMI IN will be set as a priority in this assignment. In this case, if you want to use the coaxial or optical audio input, make the appropriate selection in the “Audio Selector” (➔ page 48).
•Supported sampling rates for PCM signals (stereo/mono) from a digital input (optical and coaxial) are 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.
•The “TUNER” selector cannot be assigned and is fixed at the “- - - -
Menu | Sp Config |
Some of the settings in this section are set automatically by Audyssey 2EQ® Room Correction and Speaker Setup (➔ page 27).
Here you can check the settings made by Audyssey 2EQ Room Correction and Speaker Setup, or set them manually, which is useful if you change one of the connected speakers after using Audyssey 2EQ Room Correction and Speaker Setup.
This section explains how to specify which speakers are connected and their sizes.
Cone diameter
For speakers with a cone diameter larger than
100 Hz).
The crossover frequency can be changed in the “Crossover (Crossover Frequency)” (➔ page 43).
Note
•These settings are not available in either of the following cases:
–A pair of headphones is connected.
–The “Audio TV Out” setting is set to “On” (➔ page 50).
–“HDMI Ctrl (RIHD)” is set to “On” (➔ page 49) and you’re listening through your TV speakers.
En-42
`Large: |
Select based on the cone diameter.
Note
•If the “Subwoofer” setting is set to “No”, this setting is fixed to “Large”.
■Center*1, Surround*1`Small
`Large:
Select based on the cone diameter.
`None
■Front High*2*3*4`Small
`Large:
Select based on the cone diameter.
`None
■Surround Back*2*3*5`Small
`Large:
Select based on the cone diameter.
`None
Note
*1 If the “Front” setting is set to “Small”, the “Large” option cannot be selected.
*2 If the “Surround” setting is set to “None”, this setting cannot be selected.
*3 If the “Surround” setting is set to “Small”, the “Large” option cannot be selected.
*4 If the “Surround Back” setting is set to other than “None”, this setting is set to “None”.
*5 If the “Front High” setting is set to other than “None”, this setting is set to “None”.
To be continued
