Onkyo HT-r591 En-41, HDMI Input, Component Component Video Input, Advanced Operations, Video Out

HDMI Input

1 2 3 4 5 6

Menu HDMI Input

If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2, you must assign “HDMI2” to the “BD/DVD” input selector.

Here are the default assignments.

Input selector	Default assignment
BD/DVD	HDMI1
VCR/DVR	HDMI2
CBL/SAT	HDMI3
GAME	HDMI4
AUX	- - - - -
TV/CD	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,

TV/CD

`HDMI1, HDMI2, HDMI3, HDMI4:

Select the input to which the component has been connected.

`- - - - -:

Select if you’re not using the HDMI OUT. Each HDMI input cannot be assigned to two input selectors or more. When HDMI1 - HDMI4 have already been assigned, you must first set any unused input selectors to “- - - - -” or you will be unable to assign HDMI1 - HDMI4 to input selector.

Note

•If no video component is connected to HDMI output (even if the HDMI input is assigned), the AV receiver selects the video source based on the setting of “Component (Component Video Input)”.

•When an HDMI IN is assigned to an input selector as explained here, the same HDMI IN will be set as a priority in the “Digital Audio (Digital Audio Input)” (➔ page 42). In this case, if you want to use the coaxial or optical audio input, make the appropriate selection in the “Audio Selector” setting

(➔ page 48).

•Do not assign an HDMI IN to the TV/CD selector while “HDMI Ctrl (RIHD)” is set to “On” (➔ page 49), otherwise appropriate CEC (Consumer Electronics Control) operation will not be guaranteed.

•If you assign “- - - - -” to an input selector that is currently selected in “HDMI Through” (➔ page 49), the “HDMI Through” setting will be automatically switched to “Off”.

•The “TUNER” selector cannot be assigned and is fixed at the “- - - - -” option.

Advanced Operations

Component (Component Video Input)

1 2 3 4 5 6

Menu Component

If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign “IN2” to the “BD/DVD” input selector.

Here are the default assignments.

Input selector	Default assignment
BD/DVD	IN1
VCR/DVR	- - - - -
CBL/SAT	IN2
GAME	- - - - -
AUX	- - - - -
TV/CD	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,

TV/CD

`IN1, IN2:

Select the input to which the component has been connected.

`- - - - -:

Select if you’re not using the COMPONENT

VIDEO OUT.

Note

•The “TUNER” selector cannot be assigned and is fixed at the “- - - - -” option.

En-41